gold dress watch 1952 Omega Dress Watch
SKU: 77442018255
gold dress watch

gold dress watch 1952 Omega Dress Watch

Sale price$26.79 Regular price$29.77
Save 10%
Size: 4

Pay in installments of $7.44 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 2 - Jul 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

gold dress watch 1952 Omega Dress WatchA solid 14k carat yellow gold Omega dress presentation watch. This is very much a classic and durable example of Omega dress watches from the mid 20th Century, in a good way. A simple and clean case design frames this classic Omega designed dial. At the foot of the dial, is the original Swiss printing. The Omega name is also printed in the same black stamping with the iconic Omega logo applied. The watch is presented in good, original condition. The

A solid 14k carat yellow gold Omega dress presentation watch. This is very much a classic and durable example of Omega dress watches from the mid-20th Century, in a good way. A simple and clean case design frames this classic Omega designed dial. At the foot of the dial, is the original “Swiss” printing. The Omega name is also printed in the same black stamping with the iconic Omega logo applied.

The watch is presented in good, original condition. The case appears to be unpolished, a bonus on these early dress watches. The lugs are sharp and crisp. There is a personalization on the snap back case back. It was presented for 25 years service to XLO. Ex-Cell-O Corporation (commonly known as Ex-Cell-O) was an American manufacturer of machinery and machine tools located in suburban Detroit, Michigan, United States. The company was in operation from 1919 to 2006.

The case is quite typical from a number of Swiss watch makers of being a US contract case. Meaning the movement and dial were sent over from Omega in Switzerland, and then a contracted specific case maker was employed in the US to provide the case, having been designed and approved by Omega. This was very common at this time due to high taxes and duties being levied on imports from Europe, especially on gold. This is also why it is a gold filled case not an 18 carat gold case. These were never made in Europe. In this case, the case maker was Wadsworth. They made cases for most US watch makers

The watch is powered by the highly reliable brass finished caliber 344 Omega bumper automatic movement. The movement was used across the board by Omega in a number of time only watches since its launch in 1952, making this watch the first year the movement was introduced. This example is in excellent condition and keeping very good time.

The watch overall is in good condition, and commensurate with a watch that is now approaching 70 years old. The dial is original and not re-finished, as is often the case with these mid-century dress watches. If you are looking for an affordable classic vintage watch with a cool piece of Motor City history that can be worn every day, then this will tick the box.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 77442018255

Discover Niche Categories That Outsell gold dress watch

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 2437 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
patricia
Draper, US
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
C
CMC20
Charlottesville, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025
M
Mark Weinberg
Pawtucket, US
★★★★★ 5
Stable, attractive, and easy to turn into a table with your choice of top
Size: side table leg
The X-shape of the table legs - constructed with solid metal flanges, T-joints, X-joints and 1-inch diameter pipes - provides a strong and sturdy base for a wood top. The legs have adjustable feet pads to prevent scratches and ensure stability. Assembly of the legs is relatively simple (the instructions are clear) but you will need your own tools to attach a top. The industrial design is especially well suited to rec room or finished basement use. I am adding a 28" diameter raw edge slab of wood from a recently felled tree as the top and it is very attractive. (Photo unavailable because after I made certain it would work I sent the slab out for drying and finishing.) If you want a custom table and have a particular piece of wood you want to use, these legs are an excellent choice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
G
Grammar Guru
Bozeman, US
★★★★★ 5
Very nice kit: Beware it is NOT heavy duty plumbing pipe though!
Size: side table leg
I want to give this kit a high rating, but I need to address the "truth in advertising" bit since there may be an important disconnect between what you think you are getting and what actually comes in the box. Black plumbing used for shelving or table legs is part of an important niche in interior design. I like the industrial loft look myself and have a variety of glass, steel, and masonry elements in my home. This kit fits that look and provides plenty of "strength" for most domestic uses, like shelves or coffee tables. But they are NOT "industrial pipe" or "maximum durability pipe." Note the phrase "cast iron finish feet," which together with the other claims might lead you to think these are cast plumbing fittings. They are NOT! The feet and flanges feel like electrical conduit fittings, and the pipe sections are likely aluminum. They might be electrical or they might be multi-use, lightweight pipe. While all this might lead you to think that you're getting a truly retro, heavy-duty pipe kit made of black plumbing pipe, you are not. But, does it matter? Depends. I find the lighter pipe's smooth finish a nice "tone-down" from the rough plumbing look. All together, this kit provides plenty of strength for most furniture and the rustic pipe look, but with a nicer, lighter finish. To me that is a plus--this is a very nice kit and costs less that if you'd pieced it together from real plumbing parts (I priced it out to compare), and looks retro but cleaner. I knew what to expect because while I got this kit free on Vine, I had purchased a nearly identical kit from another seller last year. So, I'm giving it 5 stars for what it actually is and for the price, JUST BE AWARE THE NARRATIVE IS MISLEADING. Which is unfortunate because just like some people might want the heavier pipe, I'm betting more would be attracted to the look with a cleaner, lighter feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 31, 2025
F
Verified Purchase
franny
Dallas, US
★★★★★ 5
Great project & great quality
Size: 38"Height × 14" Wide, Size: 38"Height × 14" Wide
These legs were used on a 26”x72” DIY quilting ironing table. The Mdjwjj Industrial Pipe Counter Bar Height Table Leg, Metal Table Legs, Iron Base are sturdy & made of real metal, nothing cheap about this product. Legs were easy to install. Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025

recommand products